Search results

The major disadvantage of the field-oriented control (FOC) scheme of induction motors is its dependency on motor parameter variations because of the temperature rise. Among the motor parameters, rotor resistance is a parameter that can degrade the robustness of FOC scheme. An inaccurate setting of the rotor resistance in the slip frequency may result in undesirable cross coupling and performance degradation. To overcome this disadvantage, the purpose of this paper is to propose a model reference adaptive system (MRAS) rotor time constant tuning to improve the induction motor drive performance and to compensate the flux orientation error in vector control law.

First, the dynamic model and the indirect field-oriented control of induction motor are derived. Then, an inverse rotor time constant tuning is proposed based on MRAS theory where a new adaptation signal formulation is used as reference model, and the estimated stator currents obtained from induction motors (IM) state space resolution is used in the adaptive model.

The effectiveness and robustness of IM speed control with the proposed MRAS inverse rotor time constant estimator is verified through MATrix LABoratory/Simulink model simulation and laboratory experimental results. The simulation and experimental results show good transient drive performances, satisfactory for rotor resistance estimation and robustness with regard to uncertainties and load torque disturbance.

This paper presents an online tuning of the inverse rotor time constant using a new adaptation signal MRAS model. The proposed estimator is proved to guarantee the stability for different operating conditions, especially in very low/zero speed region and heavy load torque. The stability analysis of the proposed estimation procedure is also demonstrated.

In the paper an application of fuzzy logic controller (FLC) for control of thyristor DC drive is presented. During synthesis of the FLC a robustness against variation of structure of the current control plant was taken into account. Comparison between the fuzzy control system and an ordinary digital control system, carried out by simulation method, proved that FLC as a robust controller gives better performance in the range where non‐linearity and parameter variation is observed. The simulation results were confirmed by the laboratory experiment.

The purpose of this paper is to propose mover position control of linear induction motor (LIM) using an adaptive backstepping approach based on field orientation.

First, the indirect field‐oriented control LIM is derived. Then, an adaptive backstepping approach based on field‐oriented control of LIM is proposed to compensate the uncertainties which occur in the control. Mover position amplitude tracking objective is formulated, under the assumption of unknown total mass of the moving element, viscous friction, and load force, so that the position regulation is achieved.

The effectiveness and robustness of the proposed control scheme are verified by numerical simulation using Matlab/Simulink model. The numerical validation results of the proposed scheme have presented good transient control performances and robustness to uncertainties compared to the conventional backstepping control design.

The paper presents an adaptive backstepping approach for LIM control that achieves mover position amplitude tracking objective under mechanical parameter variation.

The end-effects is a well-recognized phenomenon occurring in the linear induction motor (LIM) which makes the analysis and control of the LIM with good performance very difficult and can cause additional significant non-linearities in the model. So, the compensation of parameters uncertainties due to these effects in the control system is very necessary to get a robust speed control. The purpose of this paper is to propose a new technique of LIM end-effects estimation using the inverse rotor time constant tuning in order to compensate the flux orientation error in the indirect field-oriented control (IFOC) control law.

First, the dynamic model of the LIM taking into consideration the end-effects based on Duncan model is derived. Then, the IFOC for LIM speed control with end-effects compensation is derived. Finally, a new technique of LIM end-effects estimation is proposed based on the model reference adaptive system (MRAS) theory using the instantaneous active power and the estimated stator currents vector. These estimated currents are obtained through the solution of LIM state equations.

Simulations were carried out in MATLAB/SIMULINK to demonstrate the effectiveness and robustness of LIM speed control with the proposed MRAS inverse rotor time constant tuning to estimate end-effects value. The numerical validation results show that the proposed scheme permits the drive to achieve good dynamic performance, satisfactory for the estimated end-effects of the LIM model and robustness to uncertainties.

The end-effects causes a drop in the magnetizing, primary and the secondary inductance, requiring a more complex LIM control scheme. This paper presents a new approach of LIM end-effect estimation based on the online adaptation and tuning of the LIM inductances. The proposed scheme use the inverse rotor time constant tuning for end-effects correction in LIM vector control block.

The purpose of this paper is to propose a new control strategy based on adaptive inverse control aiming at high performance control of permanent magnet synchronous motor (PMSM).

This scheme adopts the vector control with double closed-loop structure and introduces a multi-dimensional Taylor network (MTN) inverse control method into velocity-loop. First, the invertibility of PMSM’s mathematical model is proved. Second, a novel dynamic network (MTN) is presented, which has simple structure and faster computing speed. Besides, to realize the high-precision speed control, three MTNs are applied to achieve system modeling, inverse modeling and noise disturbance elimination which correspond to the function of the adaptive identifier, adaptive feed-forward controller and nonlinear adaptive filter, respectively.

This scheme is designed with the full consideration of the PMSM’s particularity. For the PMSM’s unknown dynamics and time-varying characteristics, the variable forgetting factor recursive least squares algorithm is adopted to improve identification ability, and the weight-elimination algorithm is used to remove redundant regression items in the MTN identifier and inverse controller. In addition, to reduce the influence arose from measurement noise and other stochastic factors, adaptive MTN filter is introduced to eliminate noise disturbance. The computational results show that the proposed scheme possesses excellent control performance and better robustness against the load disturbance.

The paper presents a new inverse control scheme with MTN which is practical and flexible, and the MTN-based control system is very promising for real-time applications.